ページを印刷する
For the VPC distillation vacuum regulator.
Unpack and Confirm:
The vacuum instrument contains the following components:
1. Vacuum distillation regulator with an international power supply
2. Quick Start guide or (this) User Manual
Easy to use steps:
1. Plug in the system to wall power and make sure LEDs light up
2. Mount VPC in desired location
3. Connect a hose from the vacuum pump to the port on the VPC labeled "Vacuum
Pump"
4. Connect a hose from the system to the port on the VPC labeled "System to be
controlled"
5. Use up and down arrows to set the target vacuum
pressure
6. Read and control vacuum!
Beyond the Quick Start installation instructions, care should
be taken to insure clean leak free connections using high quality
components. Below are some best practices for installation:
• Use high quality chemically resistant hose that won't breakdown and degrade with your
process
• Use hose clamps or another way to minimize leakage at vacuum interfaces
• Use Teflon tape on all NPT fittings. Consult our
connections.
1020 Campus Drive West, Morganville, NJ 07751 - Office: 732-765-0900
Fax: 732-765-1800 - [email protected] - www.digivac.com
Verify you've received everything you ordered
guide
on best practices for NPT
I
(J)D
4
□
igiVac