DigiVac VAPOR Bedieningshandleiding - Pagina 4

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} DigiVac VAPOR. DigiVac VAPOR 10 pagina's.

For the VPC distillation vacuum regulator.

Unpack and Confirm:

The vacuum instrument contains the following components:

1. Vacuum distillation regulator with an international power supply

2. Quick Start guide or (this) User Manual

Easy to use steps:

1. Plug in the system to wall power and make sure LEDs light up

2. Mount VPC in desired location

3. Connect a hose from the vacuum pump to the port on the VPC labeled "Vacuum

Pump"

4. Connect a hose from the system to the port on the VPC labeled "System to be

controlled"

5. Use up and down arrows to set the target vacuum

pressure

6. Read and control vacuum!

Beyond the Quick Start installation instructions, care should

be taken to insure clean leak free connections using high quality

components. Below are some best practices for installation:

• Use high quality chemically resistant hose that won't breakdown and degrade with your

process

• Use hose clamps or another way to minimize leakage at vacuum interfaces

• Use Teflon tape on all NPT fittings. Consult our

connections.

1020 Campus Drive West, Morganville, NJ 07751 - Office: 732-765-0900

Fax: 732-765-1800 - [email protected] - www.digivac.com

Verify you've received everything you ordered

guide

on best practices for NPT

(J)D

□

igiVac