- ページ 29

スキャナー Epson Stylus CX4600のPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Epson Stylus CX4600 48 ページ。 Epson scan icm updater v1.20 (psb.2008.07.001)
Epson Stylus CX4600 にも: パンフレット&スペック (2 ページ), 製品情報シート (4 ページ), クイックマニュアル (14 ページ), ドキュメンテーション・アップデート (2 ページ), スタートマニュアル (8 ページ), セットアップマニュアル (2 ページ), 更新 (1 ページ)

Epson Stylus CX4600 クイック・リファレンス

Maintaining Your CX4600

If you notice a decline in print quality, follow the instructions in this chapter for:
"Checking the Print Head Nozzles and Ink" (below)
"Cleaning the Print Head" on page 30
"Replacing Ink Cartridges" on page 31

Checking the Print Head Nozzles and Ink

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles and remaining
ink levels using the control panel.
1. Turn off the CX4600.
2. Load letter-size paper in the sheet feeder.
3. Press the
ink and P
B
5 seconds. The CX4600 turns on and prints a test pattern. It also shows the
percentage of ink left in each cartridge:
Print head does
not need to be
cleaned yet:
Print head needs
to be cleaned:
If the pattern does not look good, try cleaning the print head as described in the
next section.
Note:
You can also check the ink level using Status Monitor 3; see the Reference Guide.
buttons together and hold them down for about
On
29