Epson Stylus CX4600 빠른 참조 - 페이지 29

{카테고리_이름} Epson Stylus CX4600에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Stylus CX4600 48 페이지. Epson scan icm updater v1.20 (psb.2008.07.001)
Epson Stylus CX4600에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 제품 정보 시트 (4 페이지), 빠른 매뉴얼 (14 페이지), 문서 업데이트 (2 페이지), 수동 시작 (8 페이지), 설정 매뉴얼 (2 페이지), 업데이트 (1 페이지)

Epson Stylus CX4600 빠른 참조

Maintaining Your CX4600

If you notice a decline in print quality, follow the instructions in this chapter for:
"Checking the Print Head Nozzles and Ink" (below)
"Cleaning the Print Head" on page 30
"Replacing Ink Cartridges" on page 31

Checking the Print Head Nozzles and Ink

If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles and remaining
ink levels using the control panel.
1. Turn off the CX4600.
2. Load letter-size paper in the sheet feeder.
3. Press the
ink and P
B
5 seconds. The CX4600 turns on and prints a test pattern. It also shows the
percentage of ink left in each cartridge:
Print head does
not need to be
cleaned yet:
Print head needs
to be cleaned:
If the pattern does not look good, try cleaning the print head as described in the
next section.
Note:
You can also check the ink level using Status Monitor 3; see the Reference Guide.
buttons together and hold them down for about
On
29