- ページ 3

ウェザーステーション Digoo DG-TH11300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Digoo DG-TH11300 6 ページ。 Hd weather station with negative color screen

Plug in the adapter to get the main unit started, or open the battery compartment cover

and insert 3xAA batteries to main unit and 2xAAA batteries to transmitter according to

the correct polarity showed in the compartment. After powering on, the weather station

will take about 3 minutes to connect with the outdoor transmitter.

(Under adapter mode: press

Under battery driven mode: press

seconds.)

1. The weather station will automatically receive signal sending back from the external

sensor after powering on, the receiving status will last for max 3 minutes, the recei-

ving antenna signal

stop receiving outdoor signal.

2. Press "

" button on main unit to alternate the readings of different channels' dis-

play. The channel switch order is CH1 --> CH2--> CH3 -->Channel scan (from CH1

to CH2 to CH3, 10 seconds intervals).

3. Press and hold "

re-registration.

1. The distance of main unit or transmitter should be at least 5~6.5 feet (1.5~2 meters)

away from any interfering sources such as computer monitors or TV sets.

2. The main unit cannot stand close to metal window frames.

3. Please do not use other electrical products such as headphones or speakers oper-

ating on the same signal frequency, which may cause interference.

4. Neighbors using electrical devices operating on the same signal frequency can also

cause interference.

GETTING STARTED

button on top to turn on or off the backlight.

RF(OUTDOOR TEMP. & HUMIDITY)

will flash, if no signal received in 3 minutes,

" button for more than 3 seconds, then manually enter into RF

REMARKS

button to switch on the backlight lasting 5

will exist and