- ページ 23

プリンターアクセサリー Epson OP1のPDF 安全性と設置をオンラインで閲覧またはダウンロードできます。Epson OP1 26 ページ。 Operator panel
Epson OP1 にも：マニュアル (44 ページ)

2.4 Connecting Cables

Be sure to connect the cables between the Controller and the Operator

Panel properly. Do not allow unnecessary strain on the cables. (Do not

put heavy objects on the cables. Do not bend or pull the cables forcibly.)

The unnecessary strain on the cables may result in damage to the

cables, disconnection, and/or contact failure.

WARNING

disconnection, or contact failure is extremely hazardous and may result

in electric shock and/or improper function of the system. Do not use the

cables near heat or fire.

Be sure to turn OFF the Controller before connecting and disconnecting

cables. Connecting or disconnecting the cables with the power ON may

result in malfunction of the robot system.

CAUTION

(1) Turn OFF the Controller.

(2) Disconnect the bypass plug from the Controller.

(3) Connect the right angle connector

of the OP1 cable to the Controller,

and secure it with hexagon head

screws.

(4) Connect the straight connector to

the Controller connector of the

Operator Panel, and secure it with

fitting screws.

OP1 Safety and Installation Rev.3

2. Installation

Damaged cables,