Epson OP1 안전 및 설치 - 페이지 23

{카테고리_이름} Epson OP1에 대한 안전 및 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson OP1 26 페이지. Operator panel
Epson OP1에 대해서도 마찬가지입니다: 매뉴얼 (44 페이지)

2.4 Connecting Cables

Be sure to connect the cables between the Controller and the Operator

Panel properly. Do not allow unnecessary strain on the cables. (Do not

put heavy objects on the cables. Do not bend or pull the cables forcibly.)

The unnecessary strain on the cables may result in damage to the

cables, disconnection, and/or contact failure.

WARNING

disconnection, or contact failure is extremely hazardous and may result

in electric shock and/or improper function of the system. Do not use the

cables near heat or fire.

Be sure to turn OFF the Controller before connecting and disconnecting

cables. Connecting or disconnecting the cables with the power ON may

result in malfunction of the robot system.

CAUTION

(1) Turn OFF the Controller.

(2) Disconnect the bypass plug from the Controller.

(3) Connect the right angle connector

of the OP1 cable to the Controller,

and secure it with hexagon head

screws.

(4) Connect the straight connector to

the Controller connector of the

Operator Panel, and secure it with

fitting screws.

OP1 Safety and Installation Rev.3

2. Installation

Damaged cables,