ページを印刷する
Specification:
Bluetooth Range
Working Water Pressure
Working Temperature
Rain Delay Time
Waterproof
3. Initial Water Timer Setup
1
Insert Two AA Batteries
1. Remove the tray on the back of the timer by sliding
or pulling it out.
2. Insert two AA (1.5V) alkaline batteries and replace
the tray. Please do not insert rechargeable batteries
to avoid low voltage.
Note:
a. Need to pull out forcefully
when installing the battery.
b. The Battery slot cannot be
inserted backwards, forcibly
inserting it will cause damage
to the battery slot.
2
Install the Timer
Connect the timer to an outdoor hose faucet.
Your timer is now ready to be used with any product
that can be attached to a standard hose faucet.
Note:
Do not place the timer in an underground valve
box or anywhere your Bluetooth signal will be
obstructed.
3
Turn on Your Water
The water must remain on for the timer to work
properly.
50ft without interference
0.05Mpa-0.8Mpa
40.1℉-113℉(4.5℃-45℃)
24H/48H/72H
IPX5
2