Diivoo WT-03 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Diivoo WT-03. Diivoo WT-03 16 pagina's.

Specification:

Bluetooth Range

Working Water Pressure

Working Temperature

Rain Delay Time

Waterproof

3. Initial Water Timer Setup

Insert Two AA Batteries

1. Remove the tray on the back of the timer by sliding

or pulling it out.

2. Insert two AA (1.5V) alkaline batteries and replace

the tray. Please do not insert rechargeable batteries

to avoid low voltage.

Note:

a. Need to pull out forcefully

when installing the battery.

b. The Battery slot cannot be

inserted backwards, forcibly

inserting it will cause damage

to the battery slot.

Install the Timer

Connect the timer to an outdoor hose faucet.

Your timer is now ready to be used with any product

that can be attached to a standard hose faucet.

Note:

Do not place the timer in an underground valve

box or anywhere your Bluetooth signal will be

obstructed.

Turn on Your Water

The water must remain on for the timer to work

properly.

50ft without interference

0.05Mpa-0.8Mpa

40.1℉-113℉(4.5℃-45℃)

24H/48H/72H

IPX5