- ページ 8

アクセサリー Crow EDS-2000AMのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Crow EDS-2000AM 18 ページ。 Outdoor pir + mw detector
Crow EDS-2000AM にも：取付説明書 (18 ページ), 取付説明書＆ユーザーマニュアル (20 ページ)

ページを印刷する

7. Release the detector body from the metal bracket by

pulling the detector up and out.

9. Insert wires through provided access hole and wiring

channels. Attach the sealing sponge pad to the wire

opening from the rear side after the wires have been

connected and prior to final product affixing to the

mounted bracket.

11. Place the detector on the mounting bracket from top

side down and then lock the screw at the bottom.

8. Attach the rear bracket to the wall using mounting

screws.

10. Use double side adhesive washer before

re-mounting the detector on the back bracket.

12. If Pet immunity up to 15kg is desired do not install

the mechanical pet filter.

If Pet immunity up to 36kg is desired install the

mechanical pet filter. In this case, the AM option must

be turned off to avoid AM alarm.