Crow EDS-2000AM 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Crow EDS-2000AM에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow EDS-2000AM 18 페이지. Outdoor pir + mw detector
Crow EDS-2000AM에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (18 페이지), 설치 지침 및 사용자 설명서 (20 페이지)

페이지 인쇄

7. Release the detector body from the metal bracket by

pulling the detector up and out.

9. Insert wires through provided access hole and wiring

channels. Attach the sealing sponge pad to the wire

opening from the rear side after the wires have been

connected and prior to final product affixing to the

mounted bracket.

11. Place the detector on the mounting bracket from top

side down and then lock the screw at the bottom.

8. Attach the rear bracket to the wall using mounting

screws.

10. Use double side adhesive washer before

re-mounting the detector on the back bracket.

12. If Pet immunity up to 15kg is desired do not install

the mechanical pet filter.

If Pet immunity up to 36kg is desired install the

mechanical pet filter. In this case, the AM option must

be turned off to avoid AM alarm.