Crow EDS-2000AM 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Crow EDS-2000AM에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crow EDS-2000AM 18 페이지. Outdoor pir + mw detector
Crow EDS-2000AM에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (18 페이지), 설치 지침 및 사용자 설명서 (20 페이지)

페이지 인쇄

Detector Installation

Important! Prior to installation, read both "Operation" and "Selecting the mounting location"

sections carefully.

1. Install the detector in such manner that the intruder is

most likely to cross the detection area from side to side.

3. Make sure to attach the metal bracket to a leveled

straight and firm wall, leaving 10cm (3.9 inches) from

the top and 10cm (3.9 inches) from both sides, for easy

installation and maintenance.

5. Open the detector unwinding the bottom screw.

2. The detector is to be installed at height of 2.1m (6.9

ft.) for Grade 2 or 1.2m (3.9 ft.) for Grade 3

4. Placing the detector on perpendicular wall is

required for guarding a side window opening.

Alternately the Outdoor Mounting bracket can be

installed on the same wall, allowing the detector

beam to be rotated towards the window.

6. Release the rear metal bracket by unwinding

internal bottom screw.