- ページ 33
プリンターアクセサリー Epson Stylus Color 660のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 660 40 ページ。 Color ink jet printer
Epson Stylus Color 660 にも： ユーザーマニュアル (34 ページ), 製品情報シート (4 ページ), 仕様書 (2 ページ), 製品情報シート (4 ページ), 製品情報 (11 ページ), スタート・ヒア・マニュアル (20 ページ)
ページを印刷する
EPSON Stylus Color 660
5.2.1.9 Bi-D Adjustment
You perform this adjustment to correct differences in printing positions,
which is caused by incorrect printing timing in right and left directions
during the Bi-directional printing. Therefore, you are required to perform
this adjustment after performing the following operations.
Replacing the Print mechanism
n
Replacing the main board
n
Replacing the CR motor
n
Replacing the Carriage Assembly
n
Replacing g the Printhead
n
1. Select "Bi-Directional Adjustment" in the adjustment menu (Figure
5-16). The following screen appears.
Figure 5-25. Bi-D Adjustment Menu
Chapter 5
Adjustment
2. Select "Print the Bi-D adjustment pattern" on the screen, and the
screen bellow appears.
Figure 5-26. Print the Bi-D pattern
3. Click OK. The printer starts printing a Bi-D adjustment pattern. (See
the sample pattern in the following page.)
NOTE: As shown in the sample, gaps between passes are
sometimes created in different directions among patterns.
This unexpected change in direction is caused by an ink jet
printer-specific reason, which is an ink jet printer inevitably
performs a periodical cleaning specified by the flashing timer
even during Bi-D pattern printing, so that the printing
direction suddenly changes. However, this directional
difference among Bi-D patterns should not be considered,
and you can always confirm and adjust the pattern correctly
by referring to gap amount only.
Revision A
33