圧着工具 Argosy Simply45のPDF 終了の指示をオンラインで閲覧またはダウンロードできます。Argosy Simply45 4 ページ。

ページを印刷する

Data

STEP 1

Using the Simply45 Adjustable LAN Cable Stripper (Part No: MC-99-

9950) or wire stripper on the Simply45

Tool (Part No: MA-99-9951), score the cable jacket about 1.25"

(3cm) from the cable end Be sure not to cut too deep where the wire

conductors could be nicked. Remove the stripped cable jacket.

Trim all cable shielding (AL foil, metal braid) back to the cable jacket. We recommend using the Simply45

Do not cut o the drain wire. Fold the drain wire straight back about 1inch (2.5cm) over the cable jacket. If there is a center spline/pair separator cut it o

as close to the jacket as possible without nicking the wire conductors.

+44 1844 202101

All products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Connectors

Termination Instructions

(PATENT: 10,811,831 B1)

Heavy Duty RJ45 Crimp

STEP 3

[email protected]

Simply45

STEP 2

Slide the S45-1750P metal shell onto the cable jacket with the front

of the shell facing the termination end. Slide it back out of the way for

the moment.

5" Angled Flush Cutter (Part No: ME-99-008).

argosycable.com

– CAT6A STP

PN: FA-02-1750