Argosy Simply45 Termination Instructions

Browse online or download pdf Termination Instructions for Crimp tool Argosy Simply45. Argosy Simply45 4 pages.

Data
STEP 1
Using the Simply45 Adjustable LAN Cable Stripper (Part No: MC-99-
9950) or wire stripper on the Simply45
Tool (Part No: MA-99-9951), score the cable jacket about 1.25"
(3cm) from the cable end Be sure not to cut too deep where the wire
conductors could be nicked. Remove the stripped cable jacket.
Trim all cable shielding (AL foil, metal braid) back to the cable jacket. We recommend using the Simply45
Do not cut o the drain wire. Fold the drain wire straight back about 1inch (2.5cm) over the cable jacket. If there is a center spline/pair separator cut it o
as close to the jacket as possible without nicking the wire conductors.
+44 1844 202101
I
All products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.
Connectors
Termination Instructions
(PATENT: 10,811,831 B1)
Heavy Duty RJ45 Crimp
®
STEP 3
I
Simply45
STEP 2
Slide the S45-1750P metal shell onto the cable jacket with the front
of the shell facing the termination end. Slide it back out of the way for
the moment.
5" Angled Flush Cutter (Part No: ME-99-008).
®
argosycable.com
I
– CAT6A STP
®
PN: FA-02-1750
I