- ページ 28

双方向ラジオ Motorola CM160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CM160 46 ページ。 Commercial series controlhead
Motorola CM160 にも: ユーザーマニュアル (5 ページ), サービス情報 (26 ページ), 基本マニュアル (12 ページ)

Motorola CM160 ユーザーマニュアル

DELETE A NUISANCE CHANNEL

Note: Your dealer must preprogram a button to
Nuisance Delete to access this feature.
If a channel continually generates unwanted calls or
noise (a "nuisance" channel), you can temporarily
remove it from the scan list:
1
While the radio is on the Nuisance Channel,
press the preprogrammed Nuisance Channel
Delete button until you hear a tone.
2
Release the Nuisance Channel Delete
button. The nuisance channel is deleted.
Note: You cannot temporarily delete the channel
that has been preprogrammed by your dealer
as your designated scan channel, a priority
channel, or the last remaining channel in the
scan list.
English
26
Restore Channels to the Scan List
1 Power off the radio. Once the radio is powered
on again, the deleted nuisance channels are
restored to the scan list.
or
2 Press the preprogrammed Scan button to stop
the scan.
3 Press the preprogrammed Scan button again
to start scanning again. The Deleted Nuisance
Channels are restored to the scan list.
or
G
H
or
4
to change channel. Once you return
to the original channel, the deleted nuisance
channels are restored to the scan list.