Motorola CM160 Посібник користувача - Сторінка 28

Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola CM160. Motorola CM160 46 сторінок. Commercial series controlhead
Також для Motorola CM160: Посібник користувача (5 сторінок), Сервісна інформація (26 сторінок), Базовий посібник користувача (12 сторінок)

DELETE A NUISANCE CHANNEL

Note: Your dealer must preprogram a button to

Nuisance Delete to access this feature.

If a channel continually generates unwanted calls or

noise (a "nuisance" channel), you can temporarily

remove it from the scan list:

While the radio is on the Nuisance Channel,

press the preprogrammed Nuisance Channel

Delete button until you hear a tone.

Release the Nuisance Channel Delete

button. The nuisance channel is deleted.

Note: You cannot temporarily delete the channel

that has been preprogrammed by your dealer

as your designated scan channel, a priority

channel, or the last remaining channel in the

scan list.

English

Restore Channels to the Scan List

1 Power off the radio. Once the radio is powered

on again, the deleted nuisance channels are

restored to the scan list.

–

2 Press the preprogrammed Scan button to stop

the scan.

3 Press the preprogrammed Scan button again

to start scanning again. The Deleted Nuisance

Channels are restored to the scan list.

–

to change channel. Once you return

to the original channel, the deleted nuisance

channels are restored to the scan list.