- ページ 32
双方向ラジオ Motorola CM160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CM160 46 ページ。 Commercial series controlhead
Motorola CM160 にも： ユーザーマニュアル (5 ページ), サービス情報 (26 ページ), 基本マニュアル (12 ページ)
ページを印刷する
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button and
proceed to step 6.
– or –
Press the PTT button, and if the Hot Keypad feature
has been preprogrammed by your dealer, do the
following:
G
H
or
1
to select a channel that has been
programmed for telephone.
D
2
to enter menu mode.
G
H
PHONE
or
3
until
D
PHONE
4
to select
The D appears on the display.
Note:
5
Your dealer can preprogram your radio in one
of three ways to enter your access code to the
repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Press and hold the microphone PTT
and enter your access code using the DTMF
microphone keypad. Release the microphone
PTT on completion.
English
30
6
Hold microphone 2.5 to 5 cm away from your
mouth. Press and hold the PTT button to talk.
Release the PTT button when the other party
wants to talk, both parties will need to speak
in turn.
7
To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 8.
– or –
Press and hold the microphone PTT and
enter your deaccess code using the DTMF
microphone keypad. Release the microphone
PTT on completion.
8
To exit Phone Mode:
Press the preprogrammed Phone button
– or –
C
Press and hold
to disconnect the call.
D disappears from the display.
Note: