Motorola CM160 Посібник користувача - Сторінка 32

Переглянути онлайн або завантажити pdf Посібник користувача для Двостороннє радіо Motorola CM160. Motorola CM160 46 сторінок. Commercial series controlhead
Також для Motorola CM160: Посібник користувача (5 сторінок), Сервісна інформація (26 сторінок), Базовий посібник користувача (12 сторінок)

Motorola CM160 Посібник користувача
RECEIVE A PHONE CALL D
When a phone call is received, a ringing tone
sounds, alerting you to answer the phone call.
Press the preprogrammed Phone button and
proceed to step 6.
– or –
Press the PTT button, and if the Hot Keypad feature
has been preprogrammed by your dealer, do the
following:
G
H
or
1
to select a channel that has been
programmed for telephone.
D
2
to enter menu mode.
G
H
PHONE
or
3
until
D
PHONE
4
to select
The D appears on the display.
Note:
5
Your dealer can preprogram your radio in one
of three ways to enter your access code to the
repeater.
Immediate Auto – automatically sends the
access code.
Delayed Auto – your radio will transmit the
access code upon a PTT button press.
Manual - Press and hold the microphone PTT
and enter your access code using the DTMF
microphone keypad. Release the microphone
PTT on completion.
English
30
6
Hold microphone 2.5 to 5 cm away from your
mouth. Press and hold the PTT button to talk.
Release the PTT button when the other party
wants to talk, both parties will need to speak
in turn.
7
To disconnect a phone call, do one of the
following:
If your radio has Immediate Auto or Delayed
Auto programmed, go to step 8.
– or –
Press and hold the microphone PTT and
enter your deaccess code using the DTMF
microphone keypad. Release the microphone
PTT on completion.
8
To exit Phone Mode:
Press the preprogrammed Phone button
– or –
C
Press and hold
to disconnect the call.
D disappears from the display.
Note: