- ページ 35

双方向ラジオ Motorola CP160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP160 46 ページ。 Uhf2 (438-470mhz)
Motorola CP160 にも：基本マニュアル (16 ページ), 基本マニュアル (16 ページ), 基本マニュアル (18 ページ), 詳細サービスマニュアル (28 ページ), Cps/チューナー・インストレーション・マニュアル (6 ページ), サービス情報 (46 ページ), サービス情報 (46 ページ)

PHONE

Your radio allows you to place and receive

telephone calls through a repeater (depending on

phone line availability).

D appears on the display when you are in

•

Phone mode.

Your dealer/programmer can preprogram your radio

in one of two ways to enter your access/de-access

code to the repeater.

Immediate Auto – your radio will transmit the

access/deaccess code automatically upon entering

phone mode or disconnecting a phone call. You will

hear a series of tones, and see your access/

deaccess code on the display, indicating that an

access/deaccess code is being sent automatically.

Delayed Auto – your radio will transmit the access

code upon a PTT button press. The de-access code

is sent automatically when you exit phone mode.

When a phone call is received, a ringing tone

sounds, alerting you to answer the phone call.

Press the preprogrammed Phone button and skip to

step 6.

– or –

1 Select a channel that has been programmed

for telephone.

to enter menu mode.

PHONE

until

PHONE

to select

The D appears on the display.

Note:

Press and hold the PTT button to talk. Hold

the radio in a vertical position with the micro-

phone 1 to 2 inches (2.5 to 5 cm) away from

your mouth. Release the PTT button when the

other party wants to talk, both parties will need

to speak in turn.

Disconnect the phone call when the

conversation is completed.

English