- ページ 36
双方向ラジオ Motorola CP160のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CP160 46 ページ。 Uhf2 (438-470mhz)
Motorola CP160 にも： 基本マニュアル (16 ページ), 基本マニュアル (16 ページ), 基本マニュアル (18 ページ), 詳細サービスマニュアル (28 ページ), Cps/チューナー・インストレーション・マニュアル (6 ページ), サービス情報 (46 ページ), サービス情報 (46 ページ)
ページを印刷する
DISCONNECT A PHONE CALL
1 To disconnect a phone call if your radio has
Immediate Auto or Delayed Auto
programmed, exit Phone Mode.
2
Press the preprogrammed Phone button.
–
–
or
K
Press and hold
to disconnect the call.
D disappears from the display.
Note:
MAKE A PHONE CALL
Note: Only the first 8 digits of the phone number
will be displayed on your radio's display.
Press the preprogrammed Phone button and skip to
step 6.
– or –
1 Select a channel that has been programmed
for telephone.
J
2
to enter menu mode.
L
M
PHONE
3
or
until
J
PHONE
4
to select
English
34
5
When you hear a dial tone:
L
M
XXXXXXXX
or
to
select a number from
the phone list.
Note: To redial the last number dialed, press
and release the PTT button immedi-
ately after the access code is sent. The
radio sends the last number dialled.
6
Press and release the PTT button, if required
for your radio.
7
When your party answers, press and hold the
PTT button to talk. Hold the radio in a vertical
position with the microphone 1 to 2 inches
(2.5 to 5 cm) away from your mouth. Release
the PTT button when the other party wants to
talk, both parties will need to speak in turn.
8
Disconnect the phone call when the
conversation is completed.