- ページ 31

双方向ラジオ Motorola TALKABOUT T92のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Motorola TALKABOUT T92 35 ページ。 Portable two-way radios

ページを印刷する

Note: There is a short delay between the time you start

talking and when the radio transmits.

Dual Channel Monitor

Enables you to scan the current channel and another channel

alternately.

To set another channel and start Dual Channel:

1. Press

Menu button five times until the Dual Channel

icon appears. The Dual Channel will flash.

2. Press

to select the channel then press

button.

3. Press

to select the Interference Eliminator Code.

4. Press the PTT button to exit menu or

continue set up.

5. The radio starts to Dual Channel.

Note: If you set the same channel and code as the current

channel, Dual Channel Monitor turns OFF.

Silent Mode (Vibrate Alert)

Silent Mode (Vibrate Alert) notifies you that your radio is

receiving a message. This is useful in noisy environments.

When the alert is on, the radio vibrates once every 30 seconds

when you receive a message on the channel and code you set.

1. Press

Menu button seven times until Vibracall

is displayed. The current setting will flash.

2. Press

to change the setting to On/Off.

3. Press the PTT button to exit menu or

continue set up.

Keypad Tones

You may enable or disable the speaker key tones. You will hear

the key tone each time a button is pushed.

1. Press

icon appears. The current setting On/Off will flash.

2. Press either

3. Press the PTT button to confirm or

continue set up.

Note: The following are not disabled when the key tone

•Transmit time-out alert tone

•Call tone

Menu button to

•Low battery alert tone or

•The transmitted talk confirmation tone

Transmitting a Talk Confirmation Tone

You can set your radio to transmit a unique tone when you finish

transmitting. It is like saying "Roger" or "Over" to let others know

you have finished talking.

1. Press

icon appears. The current setting On/Off flashes.

2. Press

icon

3. Press the PTT button to set or

set up.

Menu button to

Menu button eight times until Keypad Tone

to turn On/Off.

feature is OFF:

Menu button nine times until the Roger Tone

to turn On or Off.

Menu button to

Menu button to continue