- ページ 33
コードレス電話 Motorola E398 seriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Motorola E398 series 44 ページ。 Tri-band wireless telephone
Motorola E398 series にも： ユーザーマニュアル (31 ページ), データシート (3 ページ), ユーザーマニュアル (29 ページ), トラブルシューティングとデバッグマニュアル (12 ページ)
ページを印刷する
Level 1 and 2 Service Manual
Troubleshooting
Manual Test Mode
Manual Test Mode Commands
Table 3. Manual Test Commands
Key Sequence
<Menu>048263* Enter manual test mode
"End" Key
Exit manual test mode
54*
Suspend
0*0*0
Select tone 0
0*0*1
Select tone 1
0*0*2
Select tone 2
0*0*3
Select tone 3
0*0*4
Select tone 4
0*0*5
Select tone 5
0*0*6
Select tone 6
0*0*7
Select tone 7
0*0*8
Select tone 8
0*0*9
Select tone 9
0*1*X
Disable tone X
3*0*1
Enable vibrator
3*0*0
Disable vibrator
5*0*0
Set audio level 0
5*0*1
Set audio level 1
5*0*2
Set audio level 2
5*0*3
Set audio level 3
5*0*4
Set audio level 4
5*0*5
Set audio level 5
5*0*6
Set audio level 6
5*0*7
Set audio level 7
6809480A37-O
Motorola E398/E399 telephones are equipped with a manual test mode capability.
This allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM/DCS test SIM must be used.
1.
Turn the phone OFF.
2.
Remove the battery as described in the procedures.
3.
Remove the customer's SIM card from the phone as described in the
procedures.
4.
Insert the test SIM into the SIM slot.
5.
Replace the battery as described in the procedures.
6.
Turn the phone ON.
Test Function/Name
April 21, 2004
Remarks
Required for all Test Mode Operations
Troubleshooting
33