Motorola E398 series Руководство по эксплуатации - Страница 33
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Беспроводной телефон Motorola E398 series. Motorola E398 series 44 страницы. Tri-band wireless telephone
Также для Motorola E398 series: Руководство пользователя (31 страниц), Информационный лист (3 страниц), Руководство пользователя (29 страниц), Руководство по поиску и устранению неисправностей и отладке (12 страниц)
Печатать страницу
Level 1 and 2 Service Manual
Troubleshooting
Manual Test Mode
Manual Test Mode Commands
Table 3. Manual Test Commands
Key Sequence
<Menu>048263* Enter manual test mode
"End" Key
Exit manual test mode
54*
Suspend
0*0*0
Select tone 0
0*0*1
Select tone 1
0*0*2
Select tone 2
0*0*3
Select tone 3
0*0*4
Select tone 4
0*0*5
Select tone 5
0*0*6
Select tone 6
0*0*7
Select tone 7
0*0*8
Select tone 8
0*0*9
Select tone 9
0*1*X
Disable tone X
3*0*1
Enable vibrator
3*0*0
Disable vibrator
5*0*0
Set audio level 0
5*0*1
Set audio level 1
5*0*2
Set audio level 2
5*0*3
Set audio level 3
5*0*4
Set audio level 4
5*0*5
Set audio level 5
5*0*6
Set audio level 6
5*0*7
Set audio level 7
6809480A37-O
Motorola E398/E399 telephones are equipped with a manual test mode capability.
This allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM/DCS test SIM must be used.
1.
Turn the phone OFF.
2.
Remove the battery as described in the procedures.
3.
Remove the customer's SIM card from the phone as described in the
procedures.
4.
Insert the test SIM into the SIM slot.
5.
Replace the battery as described in the procedures.
6.
Turn the phone ON.
Test Function/Name
April 21, 2004
Remarks
Required for all Test Mode Operations
Troubleshooting
33