- ページ 13

ラジオ Motorola CM340のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CM340 24 ページ。 Commercial series controlhead
Motorola CM340 にも：ユーザーマニュアル (5 ページ), ユーザーマニュアル (12 ページ), サービス情報 (26 ページ)

ページを印刷する

MEMORY CHANNEL

The programmable buttons (P1 and P2) can be

programmed as Memory Channel buttons which

allow you quick access to frequently used channels.

The buttons may be pre-programmed by your dealer

or are programmable by yourself.

If pre-programmed by your dealer, an appropriate

press of the button will take you to the assigned

channel.

To program a Memory Channel button yourself,

select the desired channel in the normal way and

long press the button. The button is then

programmed to the selected channel; a short press

on the button will take you to that channel.

Note: The programming is retained when you turn

off the radio.

SENDING A CALL

Select the desired radio channel.

Press the PTT button and speak clearly into the

microphone.Your mouth should be 2.5 to 5 cm

away from the microphone.

When transmitting, the red indicator will light

continuously.

Release the PTT button to listen.

Your radio may be configured for 'Transmit Inhibit'

under certain conditions (e.g. when the channel is in

use by others) in which case, the channel busy tone

will sound when you press the PTT or call button to

indicate that transmission is inhibited.

When the channel is free, the Channel Free beep

will sound, and you can make a call.

If your radio is equipped with a transmit

time-out timer (TOT), a warning tone

will sound a few seconds before

the transmission is cut off. Your radio may be

programmed to inhibit re-transmission within a

preset time.

English