- ページ 22

ラジオ Motorola CM340のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola CM340 24 ページ。 Commercial series controlhead
Motorola CM340 にも：ユーザーマニュアル (5 ページ), ユーザーマニュアル (12 ページ), サービス情報 (26 ページ)

ページを印刷する

LONE WORKER

The Lone Worker feature enables you to work alone

with added safety. You can switch the feature On or

Off by using a pre-programmed Lone Worker

button.

Switching Lone Worker On

Press the Lone Worker button to switch Lone

Worker on, when the feature enable alert will

sound.

If you have not pressed any buttons within a

programmed time, you will be reminded that

Lone Worker is switched on by a high pitched

alert tone (Lone Worker Reminder) being

sounded.

Press any button to respond and cancel the

alert, if you do not the radio will enter the

Emergency state.

Switching Lone Worker Off

Press the Lone Worker button again to switch

Lone Worker off, when the feature disable alert

will sound.

You may also switch off Lone Worker by chang-

ing the channel or switching radio off and on

again.

English

POWER LEVEL

You can transmit your calls at different transmit

power levels. A higher level means you can reach a

radio that is farther away. A lower power level

reduces the possibility of interference. Use the high

power setting only when necessary.

You can switch between high and low power levels

by using a pre-programmed Power Level button.

Using the Power Level Button

Press the Power Level button to switch to high

power when the feature enable alert will

sound and the display will show a dot in the

bottom right hand corner.

Press the Power Level button again to switch

to low power when the feature disable alert will

sound and the

"High Power " dot on the display will go out.