Motorola CM340 User Manual - Page 22
Browse online or download pdf User Manual for Radio Motorola CM340. Motorola CM340 24 pages. Commercial series controlhead
Also for Motorola CM340: User Manual (5 pages), User Manual (12 pages), Service Information (26 pages)
Print Page
LONE WORKER
The Lone Worker feature enables you to work alone
with added safety. You can switch the feature On or
Off by using a pre-programmed Lone Worker
button.
Switching Lone Worker On
1.
Press the Lone Worker button to switch Lone
Worker on, when the feature enable alert will
sound.
2.
If you have not pressed any buttons within a
programmed time, you will be reminded that
Lone Worker is switched on by a high pitched
alert tone (Lone Worker Reminder) being
sounded.
Press any button to respond and cancel the
3.
alert, if you do not the radio will enter the
Emergency state.
Switching Lone Worker Off
1.
Press the Lone Worker button again to switch
Lone Worker off, when the feature disable alert
will sound.
2.
You may also switch off Lone Worker by chang-
ing the channel or switching radio off and on
again.
English
20
POWER LEVEL
You can transmit your calls at different transmit
power levels. A higher level means you can reach a
radio that is farther away. A lower power level
reduces the possibility of interference. Use the high
power setting only when necessary.
You can switch between high and low power levels
by using a pre-programmed Power Level button.
Using the Power Level Button
1.
Press the Power Level button to switch to high
power when the feature enable alert will
sound and the display will show a dot in the
bottom right hand corner.
2.
Press the Power Level button again to switch
to low power when the feature disable alert will
sound and the
"High Power " dot on the display will go out.