- ページ 11

ラジオ Motorola GP140 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP140 Series 20 ページ。 Professional radio, power distribution and controller
Motorola GP140 Series にも：サービス情報 (32 ページ), サービス情報 (30 ページ), 基本サービスマニュアル (46 ページ), サービス情報 (30 ページ)

ページを印刷する

Power Level

You can transmit your calls at different transmit

power levels. A higher level means you can reach a

radio that is farther away. Lower power level

conserves battery power. You are advised to

transmit as frequently as possible on low power, and

use high power only when needed.

Press the programmed Tx Power button to toggle

between the options for High or Low power transmit

level. A positive indicator tone indicates that the

radio is operating in low power mode, while a

negative indicator tone indicates that the radio is

operating in high power mode.

SCAN

You can monitor several channels in order to receive

any call that is transmitted on any of these channels.

Sixteen different channels can be programmed into

a scan list. Each channel can share the same scan

list or have different scan lists assigned to them.

Once the radio's scan operation is activated and the

radio detects a call coming through a channel in its

scan list, it switches to that channel for you to

receive the call.

Starting or Stopping a Scan Operation

The LED Indicator will blink (green) during a scan

operation. It will stop blinking when the radio

switches to a channel.

Press the Scan key to start a scan operation.

Press the Scan key again to stop the scan

operation.

Talkback

If the programmable Talkback option is set, you can

respond to any calls received during the scan

operation by pressing the PTT before the

programmed hang-time ends. Check with your

dealer for details.

English