- ページ 12

ラジオ Motorola GP140 SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Motorola GP140 Series 20 ページ。 Professional radio, power distribution and controller
Motorola GP140 Series にも：サービス情報 (32 ページ), サービス情報 (30 ページ), 基本サービスマニュアル (46 ページ), サービス情報 (30 ページ)

ページを印刷する

Deleting a Nuisance Channel

If a channel continually generates unwanted calls/

noise, you can temporarily remove it from the scan

list by performing a Nuisance Channel Delete

operation.

While the radio is on the Nuisance Channel,

press and hold the Scan key until you hear a

tone.

Release the Scan key.

NOTE:

You cannot perform a Nuisance Channel Delete

on a priority channel or if there is only one remaining

channel in the scan list.

Adding a Deleted Nuisance Channel back to

the Scan List

Press the Scan key to stop the scan

operation.

Press the Scan key again to re-start the scan

operation.

English

Scan Channel Discovery Alert

Sometimes you need to know which channel the

radio has switched to during a scan operation. The

Scan Channel Discovery Alert gives you this

information.

After you have stopped a scan operation, this

feature gives you audio feedback when you select

the last channel that was switched to by the scan

operation. To do this:

Stop the scan operation.

Turn the Channel Selector to change the

channels.

When you reach the last channel the scan

operation switched to, the radio sounds an

alert tone.

Scan List Member Priority

A channel in your scan list may be prioritized (check

with your dealer for details). In such a case, the

radio will check that prioritized channel more

frequently than the other non-prioritized channels.