- ページ 4

モデム Motorola MT8733のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Motorola MT8733 12 ページ。 Docsis 3.1 modem + ax6000 router + voice
Motorola MT8733 にも：クイック・スタート・マニュアル (21 ページ)

ページを印刷する

LET'S GET STARTED

Turn off and disconnect any existing modems or routers on your network.

2. Connect coax cable that has active cable service to the modem's

COAX connector. Ensure that you have access to the bottom label

during setup and activation of the modem.

Note: You may use a coax splitter to share the cable connectivity with your

TV. Use a two-way splitter with a top frequency of 1,000 MHz or higher.

Please note this may reduce the device's performance.

3. Plug the MT8733 into a power outlet using the power adapter and

turn on the power button on the back of the device.

4. Wait for the online light (

and remain on for at least 1 minute. This process may take up to 15

minutes and the modem may reboot multiple times.

ACTIVATE WITH XFINITY

Activate your modem by following Xfinity's activation process.

You can find information on this process on their website

xfinity.com/activate.

2. Connect your computer or mobile device to your MT8733 using one

of the following methods:

•

Connect via WiFi using the SSID and password on the bottom of

the modem.

•

Connect via one of the Ethernet ports found on the back of the

modem.

3. Confirm that your MT8733 is connected to the internet by visiting a

website. If you are unable to access a website, see Troubleshooting Tips.

4. Download motosync and set up your WiFi. See next page >

for 3.0, or

for 3.1) to stop flashing