- ページ 17

ソフトウェア Epson FX-1180 - Impact PrinterのPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson FX-1180 - Impact Printer 33 ページ。 Epson serial impact dot matrix printers
Epson FX-1180 - Impact Printer にも：セットアップマニュアル (33 ページ), パンフレット＆スペック (24 ページ), 製品情報 (17 ページ), クイック・リファレンス・マニュアル (16 ページ), マニュアル (11 ページ), 仕様 (2 ページ), マニュアル (18 ページ), 仕様 (2 ページ), 限定保証 (1 ページ), リファレンス・マニュアル (34 ページ)

Single Sheets with the Paper Guide

Note:

It is recommended that you close the flap on the

front cover if paper is not loaded from the front

slot.

Follow these steps to load paper in the paper

guide:

1. Make sure the paper guide is in the

upright position. Then set the

paper-thickness lever (located under the

printer cover) to 0 if you are using

ordinary single-sheet paper. (If you are

using envelopes, see "Special Papers"

for instructions on setting the

paper-thickness lever.) Also move the

paper release lever to the single-sheet

position.

2. Turn on the printer, if necessary.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

3. Slide the left edge guide until it locks in

place next to the triangle mark on the

paper guide. Next adjust the right edge

guide to match the width of your paper.

4. Insert a sheet of paper with the printable

side down between the edge guides until

it meets resistance. The printer feeds the

paper automatically and is ready to

print.

If the first printed line on your page

appears too high or low, you can use the

Micro Adjust function to adjust the

top-of-form position. See "Micro Adjust

Function" for more information.

Single Sheets with the Paper Guide (1/1)