Epson FX-1180 - Impact Printer Quick Manual - Page 17

Browse online or download pdf Quick Manual for Software Epson FX-1180 - Impact Printer. Epson FX-1180 - Impact Printer 33 pages. Epson serial impact dot matrix printers
Also for Epson FX-1180 - Impact Printer: Setup Manual (33 pages), Brochure & Specs (24 pages), Product Information (17 pages), Quick Reference Manual (16 pages), Manual (11 pages), Specification (2 pages), Manual (18 pages), Specifications (2 pages), Limited Warranty (1 pages), Reference Manual (34 pages)

Print Page

Single Sheets with the Paper Guide

Note:

It is recommended that you close the flap on the

front cover if paper is not loaded from the front

slot.

Follow these steps to load paper in the paper

guide:

1. Make sure the paper guide is in the

upright position. Then set the

paper-thickness lever (located under the

printer cover) to 0 if you are using

ordinary single-sheet paper. (If you are

using envelopes, see "Special Papers"

for instructions on setting the

paper-thickness lever.) Also move the

paper release lever to the single-sheet

position.

2. Turn on the printer, if necessary.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

3. Slide the left edge guide until it locks in

place next to the triangle mark on the

paper guide. Next adjust the right edge

guide to match the width of your paper.

4. Insert a sheet of paper with the printable

side down between the edge guides until

it meets resistance. The printer feeds the

paper automatically and is ready to

print.

If the first printed line on your page

appears too high or low, you can use the

Micro Adjust function to adjust the

top-of-form position. See "Micro Adjust

Function" for more information.

Single Sheets with the Paper Guide (1/1)