- ページ 7

室内暖炉 Dimplex BAR20-AUのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dimplex BAR20-AU 12 ページ。 Portable electric fire
Dimplex BAR20-AU にも：クイック・スタート・マニュアル (4 ページ), 取扱説明書 (12 ページ)

ページを印刷する

Setup & Product Dimensions

General

Unpack the heater carefully and retain the packaging for possible future use, in the

event of moving or returning the fire to your supplier.

These models are designed to be free standing and are normally positioned against

a wall.

The fire incorporates a flame effect, which can be used with or without heating, so that

the comforting effect may be enjoyed at any time of the year. Using the flame effect on

its own only requires little electricity. A choice of 1kW or 2kW heat output is provided

by the fan heater, which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the same as that stated

on the heater.

Please note: Used in an environment where background noise is very low, it may be

possible to hear a sound which is related to the operation of the flame effect. This is

normal and should not be a cause for concern.

CAUTION: Except for installation and cleaning described in this manual, an

authorized service representative should perform any other servicing.

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the heater

must correspond to the supply voltage.

Before switching on, please read the safety warnings and operating instructions.

Light Emitting Diode

This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional

incandescent bulbs. These generate the same light levels as traditional bulbs, but use

a fraction of the energy consumed. These LED lamps are maintenance free and should

not require replacing during the life of the product.