Dimplex BAR20-AU 사용 설명서 - 페이지 7

{카테고리_이름} Dimplex BAR20-AU에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex BAR20-AU 12 페이지. Portable electric fire
Dimplex BAR20-AU에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

Setup & Product Dimensions

General

Unpack the heater carefully and retain the packaging for possible future use, in the

event of moving or returning the fire to your supplier.

These models are designed to be free standing and are normally positioned against

a wall.

The fire incorporates a flame effect, which can be used with or without heating, so that

the comforting effect may be enjoyed at any time of the year. Using the flame effect on

its own only requires little electricity. A choice of 1kW or 2kW heat output is provided

by the fan heater, which is located at the bottom of the unit.

Before connecting the heater check that the supply voltage is the same as that stated

on the heater.

Please note: Used in an environment where background noise is very low, it may be

possible to hear a sound which is related to the operation of the flame effect. This is

normal and should not be a cause for concern.

CAUTION: Except for installation and cleaning described in this manual, an

authorized service representative should perform any other servicing.

WARNING – THIS APPLIANCE MUST BE EARTHED

This heater must be used on an AC ~ supply only and the voltage marked on the heater

must correspond to the supply voltage.

Before switching on, please read the safety warnings and operating instructions.

Light Emitting Diode

This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional

incandescent bulbs. These generate the same light levels as traditional bulbs, but use

a fraction of the energy consumed. These LED lamps are maintenance free and should

not require replacing during the life of the product.