- ページ 8

ソフトウェア Epson PowerLite 735cのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 735c 29 ページ。 Release of check tool for network projectors v1.00 for windows
Epson PowerLite 735c にも: ユーザーマニュアル (42 ページ), 操作マニュアル (36 ページ), 仕様 (2 ページ), 操作マニュアル (47 ページ), 製品情報 (14 ページ), パーツリスト (1 ページ), 製品サポート速報 (30 ページ), インストレーション・マニュアル (19 ページ), クイック・セットアップ・マニュアル (2 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (42 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (34 ページ), 製品サポート速報 (38 ページ), 製品サポート速報 (28 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ)

Epson PowerLite 735c ユーザーマニュアル
note
The status icon colors may
be easier to see on the
projected image than on the
computer.
note
If you want your
presentation encrypted,
click
and select
Extension
Use encrypted
.
communication
This step enhances security
but decreases the data
transmission speed.
8
The color of the status icon indicates the projector's status:
Gray: the projector is not connected
Red: the projector is connected to another computer
Green: the projector is connected to your computer.
3. If you don't see your projector, check the following:
Make sure your wireless signal is strong enough to establish a
connection (see your computer documentation for details).
Make sure your computer's SSID matches the ESSID you
assigned to the projector (for example,
Remember that both the SSID and ESSID are case-sensitive.
If you are using Access Point mode, make sure the projector
and your computer are on the same subnet.
Make sure the projector and your computer are
communicating on the same channel.
Restart your computer and start NS Connection again.
If you still don't see your projector and you are using Access
Point mode, follow the instructions in "Connecting in IP
Connect Mode" on page 11 to connect to the projector.
4. Once the name of your projector appears, select it and click
. If more than one projector is listed, you can select up to
Connect
four projectors and connect to them at the same time.
If the selected projector is already being used by another person,
you can still connect to it; however, doing so automatically
disconnects the other user.
If you set up the projector to prompt you for a keyword before
connecting, you see this screen:
).
CONF ROOM
Enter keyword