Epson PowerLite 735c Manual del usuario - Página 8

note

The status icon colors may

be easier to see on the

projected image than on the

computer.

note

If you want your

presentation encrypted,

click

and select

Extension

Use encrypted

communication

This step enhances security

but decreases the data

transmission speed.

The color of the status icon indicates the projector's status:

Gray: the projector is not connected

Red: the projector is connected to another computer

Green: the projector is connected to your computer.

3. If you don't see your projector, check the following:

Make sure your wireless signal is strong enough to establish a

connection (see your computer documentation for details).

Make sure your computer's SSID matches the ESSID you

assigned to the projector (for example,

Remember that both the SSID and ESSID are case-sensitive.

If you are using Access Point mode, make sure the projector

and your computer are on the same subnet.

Make sure the projector and your computer are

communicating on the same channel.

Restart your computer and start NS Connection again.

If you still don't see your projector and you are using Access

Point mode, follow the instructions in "Connecting in IP

Connect Mode" on page 11 to connect to the projector.

4. Once the name of your projector appears, select it and click

. If more than one projector is listed, you can select up to

Connect

four projectors and connect to them at the same time.

If the selected projector is already being used by another person,

you can still connect to it; however, doing so automatically

disconnects the other user.

If you set up the projector to prompt you for a keyword before

connecting, you see this screen:

CONF ROOM

Enter keyword