- ページ 2

ソフトウェア Epson PowerLite 82cのPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite 82c 7 ページ。 Projector
Epson PowerLite 82c にも：ユーザーマニュアル (42 ページ), 仕様書 (15 ページ), 操作マニュアル (47 ページ), パーツリスト (1 ページ), インストレーション・マニュアル (19 ページ), 製品サポート速報 (25 ページ), 製品サポート速報 (8 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (28 ページ), 適合宣言 (4 ページ), 製品サポート速報 (41 ページ), 製品サポート速報 (15 ページ), 製品サポート速報 (22 ページ), 仕様 (2 ページ), 仕様 (2 ページ)

Connect your video source

The projector has 4 video connectors, as shown below. Each one requires a

different type of cable. A computer cable is included. You can purchase optional

video cables through Epson or at local electronics stores. You can connect up

to 4 video devices and use the remote control to switch among them.

Check the connectors on your video equipment. If more than one

connection is available, choose the one that provides the best quality.

The projector connectors from highest to lowest quality are

Computer1(Component) or Computer2(Component), S-Video,

and Composite Video.

Make sure you have the right cable(s) for the connection(s) you want

to use, and the cables are long enough for your setup. If you need

a cable longer than the standard 6 to 10 feet, you may need a

distribution amplifier. (See the back page for accessory information.)

Before you connect your equipment, make sure everything is turned off.

Connect your video equipment to the projector.

Component

video to

VGA cable

NOTE

To play back audio through the projector, you can connect an audio

cable from your video device to the audio in ports on the projector.

See the User's Guide on your CD-ROM for instructions.

Set up the remote control

Remove the battery cover.

Insert the batteries.

Replace the battery cover.

The remote control is ready for use.

Computer

cable

S-Video

cable

(included)

RCA video cable

(composite

video)

Audio in ports