- ページ 6
テレビ Toshiba 19A26のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 19A26 15 ページ。 Toshiba 19a26 color television service manual
Toshiba 19A26 にも： オーナーズマニュアル (29 ページ), 仕様 (2 ページ), オーナーズマニュアル (29 ページ), サービスマニュアル (34 ページ)
ページを印刷する
÷
÷
REMOTE CONTROL
1. POWER Button - Press to turn on the TV. Press again
to turn off the TV.
2. Direct Channel
Selection
Buttons
(0-9) -Allows
direct
tuning of any channel.
3. CH RTN Button
- Repeatedly press CH RTN to toggle
back and forth between the last two channels you tuned.
4.
SLEEP Button - To set the TV to turn off after a preset
amount of time, press the SLEEP button on the remote
control. The clock will count down 10 minutes each time
the button is pressed in the order of 120, 110, 100, ...... 20,
10, 0. After the sleep time is programmed,
the display will
disappear then reappear momentarily
every ten minutes to
remind you the sleep timer function is operating. To
confirm the sleep time setting, press the SLEEP button
once and the remaining time will be momentarily
displayed.
To cancel sleep time, press the SLEEP button repeatedly
until the display turns to 0.
5.
VOL (VOLUME) +/-
Buttons - Press the + button to
increase or the - button to decrease the volume level.
6.
MENU Button - Press to display the on-screen menu
function.
7.
SET + / - Buttons
- Press to select the desired setting
during on-screen operations.
8.
RESET Button
- Press to reset the on-screen picture
adjustments to their factory preset positions.
9.
TV/VIDEO Button - Switches between the TV and external
device inputs.
t0.
RECALL
Button - When you press this button, the
channel number will appear in the upper right corner of the
screen. Press the button again to remove it from the
screen.
11. MUTE Button
- To turn off the sound, press this button
once. The TV will be silenced and the word "MUTE" will
appear on the screen. The muting feature can be released
by pressing the MUTE button again or one of the VOL + or
- buttons.
12. OR (CHANNEL)
+/-
Buttons-
Press the + button to
change to a higher numbered channel set into memory.
Press the - button to change to a lower numbered channel
set into memory.
13. ENTER Button
- Press to enter or select information for
On-screen operations.
14. 1/2 Button
- Switches between channel 1 and channel 2
in the closed caption mode.
15. CAP/TEXT Button - Press to switch between normal TV
and the two closed caption modes (captions or text), when
available.
÷
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES
1. Open the battery
compartment
cover.
2. Install
two "AAA"
(penlight
size) batteries.
3. Replace
the battery
compartment
cover.
6
Use two "AAA" size penlight
batteries
(supplied)
for the
remote control.
The batteries
may last approximately
one
year depending
on how much the remote control is used.
For best performance,
it is recommended
that batteries
should be replaced
on a yearly basis, or when the remote
operation
becomes
erratic.
Caution:
Never throw batteries
into a fire.
Notes
:
• Be sure to use AAA size batteries.
• Dispose of batteries
in a designated
disposal area.
• Batteries
should
always be disposed
of with the
environment
in mind. Always
dispose
of batteries
in
accordance
with applicable
laws and regulations.
• If the remote control does not operate correctly,
or if the
operating
range becomes
reduced,
replace batteries
with
new ones.
• When necessary
to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
• Always
remove batteries
from remote control if they are
dead or if the remote control is not to be used for an
extended
period of time. This will prevent battery acid
from leaking into the battery compartment.
3X00121A(E)
P02-07
6
_
12/26/05,1:49
PM