- ページ 8
テレビ Toshiba 19A26のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 19A26 15 ページ。 Toshiba 19a26 color television service manual
Toshiba 19A26 にも： オーナーズマニュアル (29 ページ), 仕様 (2 ページ), オーナーズマニュアル (29 ページ), サービスマニュアル (34 ページ)
ページを印刷する
÷
SETTING THE LANGUAGE
This TV can display the on-screen
displays
and adjustment
menus in English, Spanish,
or French.
The on-screen
language
selection
(step 3, below) will automatically
appear on the screen when you press the MENU button
initially. Select the language you prefer first, then proceed with the other menu options.
÷
]
Press MENU.
I
MENU
II
CH SETUP
\IISPICTURE
--
|
LANGUAGE
/1_
V'CHIP SET
]
Press SET
+ or - to select the
| LOCK
|
0N TIMER
LANGUAGE
mode,
then
press
<+/-/ENTER/MENU)
ENTER.
[]
Press SET + or - until the " I_"
indicator
points to the desired
language:
EngLish
(ENGLISH),
Spanish
(ESPANOL)
or French
(FRANCAIS),
then press ENTER.
LANGUAGE / IDIOMA,' LANGUE
• ENGLISH
ESPAi_OL
FRANCNS
( +/ - / ENTER/ MENU}
]
Press MENU
until the
repeatedly
menu screen is cleared.
NOTE:
If Spanish
or French is chosen,
the closed caption
indicators
will be in the selected
language,
but the closed caption text
will not be affected
by the language
selection.
TV OPERATION
]
To turn on the TV, press POWER.
DIRECT
CHANNEL
SELECTION
buttons
(0-9) - Press
]
The VOLUME
be
to
desired
level
can
adjusted
a
by
pressing
VOL (VOLUME)
+ or -.
[]
The sound level will be indicated
on the TV screen by
GREEN
BARS AND A NUMBER.
As the sound level
increases,
so do the number of BARS AND THE
NUMBER
on the screen. The same is true for decreas-
ing the level.
Set the TV/CABLE
menu option to the appropriate
position.
When shipped
from the factory,
this menu
option is in the CABLE
setting.
See "TO MEMORIZE
CHANNELS"
on page 9.
TV - VHF/UHF channels
CABLE - CABLE TV channels
[]
CH (CHANNEL) + and - buttons
Press and release CH (CHANNEL) + or -. The
channel automatically stops at the next channel
programmed into the TV's memory. Press and hold the
button down to change channels more quickly.
For proper operation, make sure you program
channels into the TV's memory before tuning
channels.
See "TO MEMORIZE CHANNELS" on page 9.
these buttons to select a channel.
The channel
number will
appear on the upper right corner of the TV screen.
If an
invalid channel
number is selected,
the display will revert to
the previous
channel.
TV MODE DIRECT
CHANNEL
SELECTION
- When the
TV/CABLE
menu option is in the TV position,
all channels
can be instantly selected by using two buttons (For example,
to select channel
2, press "0," then "2." If you press only "2,"
channel
selection
will be delayed
for a few seconds).
For
channels
10 and above, press the two digits in order.
CABLE
mode direct
channel
selection
When the TV/CABLE
menu option is in the CABLE position,
channels
can be selected
as follows:
1-9
10-12
13- 99
100-125
Press "0" twice, then 1-9 as needed.
Example,
to select channel
2, press
"002."
Press "0", then remaining
2 digits.
Example,
to select channel
12, press
"012."
Press the 2 digits in order.
Example,
to select channel
36, press
"36."
Press the 3 digits in order.
Example,
to select channel
120, press
"120."
NOTE:
If the station being viewed stops broadcasting,
the TV
will automatically
shut off after 15 minutes.
÷
8
3X00121A(E)
P08-12
8
_
22/12/05,
4:15 PM