- ページ 18

テレビ Toshiba 19DL834BのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 19DL834B 47 ページ。 Digital series

ページを印刷する

A wide variety of external equipment can be connected via the sockets located on the side and back of the

TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the

buttons on the left side of the TV may be used for some functions.

Switching on

If the standby LED is unlit, check that the mains plug is con-

nected to the power and press

the TV to switch the television on. Then the LED lights up in

green. If the picture does not appear, press

remote control; it may take a few moments.

To put the television into Standby, press

remote control. To view the television, press

The picture may take a few seconds to appear.

Note: The active Standby LED may appear for a few moments

when the TV is switched off.

For energy saving:

Turning the TV off at its mains supply, or un-plugging it, will

cut energy use to nearly zero for all TV's. This is recom-

mended when the TV is not being used for a long time, e.g.

when on holiday.

Reducing the brightness of the screen will reduce energy use.

Energy efﬁ ciency cuts energy consumption and thus saves

money by reducing electricity bills.

NOTE: Putting the TV into standby mode, will reduce energy

consumption, but will still draw some power.

Controlling the TV

button on the left side of

button on the

button again.

English - 17 -

Using the Remote Control

Press MENU button on the remote control to see the

menus.

The main menu appears as a group of icons each for a

menu option. Press Left or Right button to select a topic,

and press OK button.

In sub menu screen mode the menu appears as a list. Press

Up or Down button to select a topic, and press OK button.

To use the options press Up or Down button on the remote

control to move up and down through them and OK button,

Left or Right button to select the required choice. Follow

the on screen instructions. The functions of each menu are

described in the manual.

Using the Controls and Connections on the TV

Using the control buttons on the side of the TV:

• To alter the volume press

does not change, press

button again.

• To alter the programme position press

and then press

• To select an external input, press and hold

until "Sources list" is displayed. To select an external input,

press

button repeatedly until the appropriate input

source is selected.

NOTE: The USB socket has limited functionality, and Toshiba

can take no responsibility for damage to other connected

equipment.

Please always refer to the owner's manual of the equipment

to be connected for full details.

button. If the volume

button twice and press

button once

button.

button