- ページ 19

テレビ Toshiba 19DL834BのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba 19DL834B 47 ページ。 Digital series

ページを印刷する

Before switching on the TV, put your decoder and media recorder to Standby if they are connected and

ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as

IMPORTANT: Ensure that the aerial or cable is

connected and a Common Interface module is not

inserted before switching on the TV for the ﬁ rst time

installation.

Connect the mains plug and switch the TV

using the side standby switch. If the TV does not

switch on, press any numbered or

the remote control, then the language selection

menu will be displayed. This screen will appear

the ﬁ rst time that the TV is switched on and each

time the TV is reset.

By pressing

Up or Down button, highlight the

language you want to set and press OK button.

The following message will be displayed next:

By pressing

Left or Right button, select the

country you want to set and press Down button

to highlight Teletext Language option. Use

Left or Right button to select desired Teletext

Language.

Press

Down button after setting Teletext Language

option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want

to scan coded stations.

Press

OK button on the remote control to continue

and the following message will be displayed on

the screen:

Initial Installation

detailed on page 12.

to on

button on

English - 18 -

Select

Yes button by using Left or Right button

and press OK button to continue. Afterwards, the

following OSD will be displayed on the screen:

If you select

Cable option, the following screen

will be displayed:

You can select frequency ranges from this

screen. For highlighting lines you see, use Up or

Down button. You can enter the frequency range

manually by using the numeric buttons on the

remote control. Set Start and Stop Frequency as

desired by using numeric buttons on the remote

control. After this operation, you can set Search

Step as 8000 kHz or 1000 kHz. If you select

1000 kHz, the TV will perform search process

in a detailed way. Searching duration will thus

increase accordingly. When ﬁ nished, press OK

button to start automatic search.

If you select

Aerial option from the Search Type

screen, the television will search for broadcasts.