- ページ 29
ソフトウェア Epson PowerLite Pro G6550WUのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson PowerLite Pro G6550WU 47 ページ。 3lcd projector
Epson PowerLite Pro G6550WU にも: 操作マニュアル (48 ページ), 操作マニュアル (49 ページ), クイック・リファレンス (7 ページ), クイック・リファレンス・マニュアル (4 ページ), インストレーション・ハンドブック (3 ページ)
Solving Problems
See the following sections to check for solutions to problems you may have using EasyMP Network
Updater.
Solving Network Connection Problems
Solving Problems When Updating
Error Message List
Error Status
Solving Network Connection Problems
Try these solutions depending on your network environment.
Solutions When You Cannot Find Connected Projectors (Wired)
Parent topic:
Solutions When You Cannot Find Connected Projectors (Wired)
When you cannot connect the projector over a network using a wired connection, try the following
solutions. If you cannot resolve the problem, contact your network administrator.
• Check the status of the external devices used for the network connection or the projector's setting
environment.
• Connect the network cable securely.
Note:
• Use a commercially available 100BASE-TX or 10BASE-T LAN cable.
• To prevent malfunctions, use a category 5 or higher shielded LAN cable.
• Check the projector's network settings.
• Set DHCP to Off. When DHCP is set to On, it may take some time to enter LAN standby status if an
available DHCP server is not found.
Go to Network > Network Configuration > Wired LAN > DHCP or Network > Network
Configuration > Wired LAN > IP Settings > DHCP.
• Set the IP address, the subnet mask, and the gateway address for the projector correctly.
• Close network settings on the projector, and then return to the LAN standby screen.
Solving Problems
29