- ページ 7

ステレオシステム Philips AZ 2045のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips AZ 2045 9 ページ。 Cd soundmachine
Philips AZ 2045 にも：ユーザーマニュアル (15 ページ), 仕様 (2 ページ), ユーザーマニュアル (12 ページ), マニュアル (8 ページ), サービスマニュアル (34 ページ), マニュアル (10 ページ), (スウェーデン語）Snabbmanual (8 ページ)

ページを印刷する

English

TOP AND FRONT PANELS

(See 1)

1SOURCE – selects CD/ TUNER / TAPE function

2y – power on/ off switch

3Display – shows the status of the set

4Cassette recorder keys

RECORD 0 – starts recording

PLAY 2 – starts playback

SEARCH 5/6 – fast winds/rewinds tape

STOP 9 – stops tape

PAUSE ; – pauses playback or recording

5BASS, MID, HIGH – EQ keys to adjust the bass,

mid & treble frequencies

6PROG

CD:

programs tracks and reviews the program;

Tuner: programs preset radio stations

Navigation controls

7∞, §

CD:

– searches back and forward within a

track;

– skips to the beginning of a current

track/ previous/ later track

Tuner: – tunes to radio stations (down, up).

82; – starts or pauses CD playback

99 – stops CD playback;

– erases a CD program

0MODE – selects different play modes:

e.g.

(random) order

REPEAT

SHUFFLE

!Door – lift at the respective door to open cassette/

tape or cd compartment

@VOLUME – to adjust volume level

#REMOTE SENSOR (for AZ2045 model only) –

infrared sensor for remote control

$PRESET DOWN/ UP (–, +) – selects a preset

tuner station (down, up)

%BAND – selects waveband

^DBB – (Dynamic Bass Boost) activates a more

vivid bass response

BACK PANEL

&Telescopic aerial – improves FM reception

*Battery compartment – for 6 batteries,

type R-20, UM1 or D-cells

CONTROLS

(Voltage selector (inside battery compartment,

some versions only) – adjust to match the local

voltage 110/220V before plugging in the set

)p – 3.5 mm stereo headphone socket

Note: The speakers will be muted when

headphones are connected to the set.

¡AC MAINS – inlet for mains lead

REMOTE CONTROL (for AZ2045 only)

1CD – selects CD sound source

2y – switches the set off

Note: When the set is switched off, the remote

control cannot operate any commands.

The set needs to be switched on first via the set's

y button.

3VOLUME 3,4 – adjusts volume level (up, down)

4SHUFFLE – plays all CD tracks in random order

5BASS – selects DBB on/off

62; – starts/ pauses CD playback

7SEARCH 5, 6 – searches backwards/ forwards

within a track

8BAND – selects FM/ MW (AM) waveband

9PRESET +, – – selects a preset radio station

(up, down)

0TUNING ∞, § – tunes to tuner stations

(down, up)

!TUNER – selects tuner sound source

@9 – stops CD playback;

– erases a CD program

#¡, ™ – skips to the beginning of a current track

previous/ subsequent track

$MUTE – interrupts/ resumes sound

%REPEAT – repeats a track /program/ entire CD

CAUTION

Use of controls or adjustments or performance of

procedures other than herein may result in hazardous

radiation exposure or other unsafe operation.

POWER SUPPLY

Whenever convenient, use the power supply to

conserve battery life. Make sure you remove the

power plug from the set and wall outlet before

inserting batteries.

BASIC FUNCTIONS

Batteries (not included)

• Insert 6 batteries, type R-20, UM-1 or D-cells,

(preferably alkaline) with the correct polarity.

Remote control (for AZ2045 only)

• Insert 2 batteries, type AAA, R03 or UM4

(preferably alkaline). (see A)

Incorrect use of batteries can cause electrolyte

leakage and will corrode the compartment or cause

the batteries to burst.

• Do not mix battery types: e.g. alkaline with carbon

zinc. Only use batteries of the same type for the

set.

• When inserting new batteries, do not try to mix old

batteries with the new ones.

• Batteries contain chemical substances, so

they should be disposed of properly.

Using AC Power

1 Check if the power supply, as shown on the type

plate located on the bottom of the set,

corresponds to your local power supply. If it does

not, consult your dealer or service centre.

2 If your set is equipped with a voltage selector,

adjust the selector so that it matches with the

local mains.

3 Connect the mains lead to the wall socket.

4 To disconnect the mains supply, unplug the set

from the wall socket.

Auto-Standby mode

When a CD or tape has reached the end of playback

and remains in the stop position for more than

15 minutes, the set will switch off automatically to

save power.

The type plate is located on the bottom of the

set.

BASIC FUNCTIONS

Switching on and off and selecting function

1 Press y on the set to switch on.

2 Press SOURCE once or more to select:

function.

TAPE

3 Press y to switch off the set.

DIGITAL TUNER

Notes:

– To change from

TAPE

TUNER

when you are switching off the set: first, make

sure you press the tape STOP 9 key to end

playback and all the cassette keys are released.

– The tone, sound settings, tuner presets and the

volume level (up to a maximum volume level of 20)

will be retained in the set's memory.

Adjusting volume and sound

1 Adjust the volume with the VOLUME control.

™ Display shows the volume level and a number

from 0-32. (See 2)

2 Press DBB once or more to select dynamic bass

boost on or off.

™ Display: shows

when activated.

3 To adjust the bass, mid and treble tones, press and

hold + or – on the BASS, MID, HIGH keys until

you reach the desired level, –5 to +5.

™ Display briefly shows

BASS

MID

level. (See 3)

Note: To prevent sound interference the bass control

options operate exclusively. You cannot combine the

bass from BASS with DBB

™ The display shows

or the

is automatically switched off to remind you if you

attempt to use both bass settings

Mute (for AZ2045 only)

1 Press MUTE on the remote control to interrupt

sound reproduction instantly.

™ Playback continues without sound and the

display flashes

2 To reactivate sound reproduction you can:

– press MUTE again;

– adjust the volume controls;

– change source.

DIGITAL TUNER

Tuning to radio stations

1 Press y to on, then press SOURCE to select

TUNER

–

is displayed briefly and then the radio station

frequency, waveband and, if programmed, a

TUNER

preset number are shown. (See 4)

2 Press BAND once or more to select your

waveband.

function, or

, or

and the

HIGH

indicator