- ページ 40

プロジェクター Toshiba TDP-F10UのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Toshiba TDP-F10U 50 ページ。 Led projector

SD/USB Memory Device Opeation (continued)

Exit Slide show

Press

button to exit slide show when slide show is in operation.

Disconnecting SD/USB Memory device

If slide show is playing, press

conducting any operations.

SD/USB memory device can be unplugged safely after the thumbnails are displayed in the

file view mode.

CAUTION

• Be sure to follow the above instructions. Disconnecting a SD or USB card during

playing slide show may cause a system malfunction or data corruption.

About SD and USB memory function

1 The USB terminal

The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB

memory device.

2 The SD terminal

The SD terminal supports SD and SDHC memory cards.

3 SD/USB memory

•

8GB limited SD/USB memory size.

•

Do not support USB HDD (Hard disk).

•

Do not support USB hub.

•

Some USB card readers such as multi-card readers are not supported.

4 SD and USB memory devices whose operation has been verified.

Toshiba does not guarantee the operation of all USB devices.

SanDisk: SD (512MB, 1GB, 2GB), SDHC (4GB).

Toshiba: SD (256MB, 512MB, 1GB, 2GB), SDHC (8GB)

Note

•

This projector does not support all SD and USB memory devices.

5 Backing up the data

Toshiba recommends that you back up the data saved in the SD/USB memory device

before use. (Toshiba assumes no liability for losses incurred by data lost through the use of

this projector.)

button to exit silde show mode. Wait for a while without