Toshiba TDP-F10U Instrukcja obsługi - Strona 40

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-F10U. Toshiba TDP-F10U 50 stron. Led projector

SD/USB Memory Device Opeation (continued)
Exit Slide show
Press
button to exit slide show when slide show is in operation.
Disconnecting SD/USB Memory device
If slide show is playing, press
conducting any operations.
SD/USB memory device can be unplugged safely after the thumbnails are displayed in the
file view mode.
CAUTION
• Be sure to follow the above instructions. Disconnecting a SD or USB card during
playing slide show may cause a system malfunction or data corruption.
About SD and USB memory function
1 The USB terminal
The USB terminal of the projector is USB 1.1 compliant, which can connect with a USB
memory device.
2 The SD terminal
The SD terminal supports SD and SDHC memory cards.
3 SD/USB memory
8GB limited SD/USB memory size.
Do not support USB HDD (Hard disk).
Do not support USB hub.
Some USB card readers such as multi-card readers are not supported.
4 SD and USB memory devices whose operation has been verified.
Toshiba does not guarantee the operation of all USB devices.
SanDisk: SD (512MB, 1GB, 2GB), SDHC (4GB).
Toshiba: SD (256MB, 512MB, 1GB, 2GB), SDHC (8GB)
Note
This projector does not support all SD and USB memory devices.
5 Backing up the data
Toshiba recommends that you back up the data saved in the SD/USB memory device
before use. (Toshiba assumes no liability for losses incurred by data lost through the use of
this projector.)
button to exit silde show mode. Wait for a while without
40