- ページ 23

ステレオシステム Philips FW M575のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Philips FW M575 32 ページ。 Philips mp3/wma mini hi-fi system
Philips FW M575 にも： クイック・スタート・マニュアル (4 ページ), クイック・スタート・マニュアル (4 ページ), ユーザーマニュアル (30 ページ), 仕様 (3 ページ), クイック・スタート・マニュアル (4 ページ)

ページを印刷する
Philips FW M575 ユーザーマニュアル
Rewinding / Fast forwarding
1
Stop playback, press à or á.
➜
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
●
For recording, use only tape of IEC type I
(normal tape).
●
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
●
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
●
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
●
If "CHECK TAPE" is displayed,
the protection tab has been
broken. Put a piece of clear
adhesive tape over the
opening.
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.

Preparation for recording

1
Press TAPE to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
USB – connect a USB mass storage device.
When recording is in progress
➜
starts flashing.
REC
●
It is not possible to listen to another source,
except tape dubbing.
●
It is not possible to activate the timer function
during recording or tape dubbing.

One touch recording

1
Press CD, TUNER, AUX or USB to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
●
Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" is displayed.
23