Philips FW M575 사용자 설명서 - 페이지 23

{카테고리_이름} Philips FW M575에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Philips FW M575 32 페이지. Philips mp3/wma mini hi-fi system
Philips FW M575에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (4 페이지), 사용자 설명서 (30 페이지), 사양 (3 페이지), 빠른 시작 매뉴얼 (4 페이지)

Philips FW M575 사용자 설명서
Rewinding / Fast forwarding
1
Stop playback, press à or á.
The tape will stop automatically at the end of
rewinding or fast forwarding.
2
Press Ç to stop rewinding or fast forwarding.
Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD or
TUNER, for example).
General information on
recording
For recording, use only tape of IEC type I
(normal tape).
The recording level is set automatically,
regardless of the position of the Volume, DBB,
DSC and so forth.
The tape is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.
To prevent accidental
recording, break out the tab
on the left shoulder of the
tape side you want to protect.
If "CHECK TAPE" is displayed,
the protection tab has been
broken. Put a piece of clear
adhesive tape over the
opening.
Tape Operation/Recording
IMPORTANT!
– Recording is permissible if copyright or
other rights of third parties are not
infringed upon.
– Recording is possible only on tape deck 2.

Preparation for recording

1
Press TAPE to select TAPE 2.
2
Load a recordable tape into tape deck 2 with full
spool to the left.
3
Prepare the source to be recorded.
CD – load the disc(s).
TUNER – tune to the desired radio station.
TAPE – load the prerecorded tape into tape
deck 1 with the full spool to the left.
AUX – connect external equipment.
USB – connect a USB mass storage device.
When recording is in progress
starts flashing.
REC
It is not possible to listen to another source,
except tape dubbing.
It is not possible to activate the timer function
during recording or tape dubbing.

One touch recording

1
Press CD, TUNER, AUX or USB to select the
source.
2
Start playback of the selected source.
3
Press RECORD to start recording.
To stop recording
Press Ç on the system.
Note:
– One Touch Recording is not possible in TAPE
mode, "SELECT SOURCE" is displayed.
23