- ページ 10
ストレージ CRU QX118のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。CRU QX118 16 ページ。 Receiving frame
CRU QX118 にも： ユーザーマニュアル (20 ページ)
ページを印刷する
10
3.
Orient a SHIPS Module or SHIPS Rugged Module so that its pins are downward and facing
the QX118. Insert it into the open slot on the QX118 receiving frame.
4.
Close the module slot door. It will snap into place. The module will automatically power on
when the computer is turned on.
5.
Power on the computer if it is powered off.
3.2. Safe SHIPS Module Removal
CAUTION
If hot swapping is not available, then failure to turn off your computer be-
fore removing or installing a SHIPS module may result in data loss.
CRU has designed the QX118 to support hot swapping. However, your en-
tire system must support hot swapping, including your motherboard,
BIOS/UEFI, CPU, operating system, and host bus adapter. CRU sells hot-
swap-capable HBAs and cables to help simplify your installation needs.
They are available on the QX118 product page at cru-inc.com.
1.
Power off your computer. If you have hot swapping capability, then you do not need to turn
the computer off, but you must make sure that data on the module you wish to remove is
not being accessed by your computer.
QX118 Receiving Frame Quick Start Guide