CRU QX118 빠른 시작 매뉴얼 - 페이지 10

{카테고리_이름} CRU QX118에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CRU QX118 16 페이지. Receiving frame
CRU QX118에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)

Orient a SHIPS Module or SHIPS Rugged Module so that its pins are downward and facing

the QX118. Insert it into the open slot on the QX118 receiving frame.

Close the module slot door. It will snap into place. The module will automatically power on

when the computer is turned on.

Power on the computer if it is powered off.

3.2. Safe SHIPS Module Removal

CAUTION

If hot swapping is not available, then failure to turn off your computer be-

fore removing or installing a SHIPS module may result in data loss.

CRU has designed the QX118 to support hot swapping. However, your en-

tire system must support hot swapping, including your motherboard,

BIOS/UEFI, CPU, operating system, and host bus adapter. CRU sells hot-

swap-capable HBAs and cables to help simplify your installation needs.

They are available on the QX118 product page at cru-inc.com.

Power off your computer. If you have hot swapping capability, then you do not need to turn

the computer off, but you must make sure that data on the module you wish to remove is

not being accessed by your computer.

QX118 Receiving Frame Quick Start Guide