- ページ 15

アンプ Crunch GTX 750のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Crunch GTX 750 20 ページ。 Gravity series class a/b mono car audio amplifiers
Crunch GTX 750 にも：オーナーズマニュアル (20 ページ)

ページを印刷する

G T X 7 5 0 _ G T X 1 2 0 0

POWER/PROTECT (Also located on the Bass Remote unit)

If the POWER LED lights up, the amplifier is ready for operation.

If the PROTECT LED lights up, a malfunction is indicated. Attend in this case the chapter TROUBLE SHOOTING.

The REMOTE port is for the cable of the enclosed bass remote controller and only to use in the LP/BP mode. With this bass

remote controller, you are able to adjust the bass level e.g. out of the driver's seat. Please use only the enclosed bass remote

controller and cable.

The BASS BOOST controller adjusts the bass boost enhancement continuously from 0dB to +12dB at 45 Hz.

The SUB SONIC controller (Subsonicfilter) limits the ultralow and not hearable frequencies of the audiosignal to below, to avoid

a mechanical and electrical overloading on the subwoofer. The cut-off frequency is adjustable from 15 to 55 Hz and depends on

the size of the subwoofer.

The LOW PASS controller adjusts the cut-off point of the frequency range to above. The cut-off frequency is continuously

adjustable from 40 Hz to 150 Hz.

The LEVEL controller adjusts the input sensitivity of the amplifier to align the audio signal from the head unit.

The input sensitivity is adjustable from 5 to 0.2 Volts.

The LINE OUTPUT RCA jacks provide a linear fullrange audiosignal to supply an additional amplifier.

The LINE INPUT RCA jacks must be connected with the RCA output jacks of the headunit.

FUNCTIONS AND OPERATIONAL CONTROLS

1 5